AP bridge settings

RouterOS Beginner Basics
1

Hi guys, i tryin to make some code that will configure my hap lite as acces point.
I sendin command through java api, and have some troubles.

Commands that i send:
/interface wireless
set wlan1 ssid=Mvk_networks frequency=2442
band=2.4ghz-b/g
mode=ap-bridge disabled=no
wireless-protocol=802.11
//interface wireless security-profiles>
set default authentication-types=wpa2-psk
wpa2-pre-shared-key=Nostromo

then i got log


!trap
=category=0
=message=no such command or directory (interface wireless)

!trap
=message=no such command
set wlan1 ssid=Mvk_networks frequency=2442

!done

!trap
=message=no such command prefix
band=2.4ghz-b/g\

!done

!trap
=message=no such command prefix
mode=ap-bridge disabled=no

!done

!trap
=message=no such command prefix
wireless-protocol=802.11

!done

!trap
=message=no such command prefix
//interface wireless security-profiles>

!done

!trap
=category=0
=message=ambiguous input ()
set default authentication-types=wpa2-psk

!trap
=message=no such command prefix

!done
wpa2-pre-shared-key=Nostromo

!trap
=message=no such command prefix

!done

Can u write some example for me? i think somethin that i send in commands is wrong.
Thank u all

2

Hi , try this format :

/interface wireless set wlan1 ssid=Mvk_networks frequency=2442 band=2.4ghz-b/g mode=ap-bridge disabled=no wireless-protocol=802.11

do not use new line between commands