Ap Wlan NAT + virtual AP + Bridge in ether1 stops nat, why?

RouterOS Wireless Networking
1

Hi all
i have ap configurated
with wlan1 with dhcp and nat in eth1 and worked perfectaly
when add virtual ap and create bridge with virtualap+ether1 …
Network on virutalap work good but wlan1 nat ..stopping.
and in route gateway ip for nat when enable bridge is reachable from ether1 to bridge1

why?

2

Please show:
/ip ad pr
/int bri po pr
/ip fi nat pr

3

[admin@xxxxx] > ip address print
Flags: X - disabled, I - invalid, D - dynamic

ADDRESS NETWORK INTERFACE

0 10.0.201.1/24 10.0.201.0 wlan1
1 192.168.2.14/24 192.168.2.0 ether1

[admin@xxxxx] > int bri po pr
Flags: X - disabled, I - inactive, D - dynamic

INTERFACE BRIDGE PRIORITY PATH-COST HORIZON

0 ether1 bridge1 0x80 10 none
1 I hp_privata bridge1 0x80 10 none


[admin@xxxxx] > ip fi nat print
Flags: X - disabled, I - invalid, D - dynamic
0 chain=srcnat action=masquerade to-addresses=192.168.2.1 src-address-list=“” out-interface=ether1

4

RESOLVED.

I have added policy mangle for mark all packet input in interface wlan2
and added policy NAT masquarade all packet marked .