Assign VLans to Ports

RouterOS Beginner Basics
1

Hello. I have done a search on VLan and it came back with over 16K results, so thought I would take the chance and post.
Anyway I have the following RB260GS
VLan I have are:
VLan 01, VLan 02, VLan 03, VLan 04 and VLan 05

Now I need tagged and untagged on various ports so I need to set it up as follows.

Port 1 Tagged to VLan 01, VLan 02, VLan 03 and VLan 05
Port 2 Tagged to VLan 01, VLan 02, VLan 03 and VLan 05
Port 3 Tagged to VLan 03, Untagged VLan 04 and Tagged to VLan 05
Port 4 Untagged to VLan 04.
Port 5 Tagged to VLan 02, VLan 03 but Untagged to VLan 05

Can anybody please share a screen shot of how they can tag and untag to specific ports please?
Thansk
Regards
Paul.
Vlan.JPG

2

Your device quite likely runs SwOS (which means you’re using wrong part of forum to as your question).

But you may want to look at this page: https://wiki.mikrotik.com/wiki/SwOS/CSS106-VLAN-Example

3

Cheers was just about to post saying I found it.
Thanks