By reading the link!!! I posted above.
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
The link from the CCR will be a TRUNK Port to the Audience.
The only vlan you need to identify on the audience itself for vlans is the
management or trusted subnet.
The rest of your question is easy
by /interface bridge ports and /interface bridge vlans
See the example here.
https://forum.mikrotik.com/viewtopic.php?t=182276
EXAMPLE (ANY RoS) DEVICE SETUP and read the notes!
(vlans not assigned in wifi settings, but associated to WLANs via bridge port and bridge lan interface settings).