August new products, "ac" and others...

Hardware MikroTik hardware general
1

Cloud Router Switch 109-8G-1S-2HnD-IN
is new “small size low cost” member of our CRS series. It comes with eight Gigabit Ethernet ports and high power 1000mW 2.4GHz wireless. Product supports 10-57V and is 802.3af/at compliant!
http://routerboard.com/CRS109-8G-1S-2HnD-IN


mAP
The mAP is a tiny size wireless 2.4GHz Access Point with full RouterOS capabilities. It is very portable, since it accepts power from a wide variety of sources - USB, Passive or Active PoE (802.3af and 802.3at) and power jack. It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
http://routerboard.com/RBmAP2n


NetBox 5
802.11ac support for up to 540Mbits, waterproof enclosure, 1300mW output
http://routerboard.com/RB911G-5HPacD-NB

SXT ac
802.11ac up to 540Mbit, 1300mW RF output, low latency Point to Point
http://routerboard.com/RBSXTG-5HPacD

SXT SA ac
802.11ac up to 540Mbit, 1300mW RF output, wide beamwidth sector antenna
http://routerboard.com/RBSXTG-5HPacD-SA

And 4 different model of NetMetal 5 2x2 and 3x3!!!
5Ghz integrated 802.11ac Tripple Chain AP/Backbone/CPE, 3xRPSMA connectors, miniPCI-e slot, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB922UAGS-5HPacT-NM

5Ghz integrated 802.11ac Dual Chain AP/Backbone/CPE, 2xRPSMA connectors, miniPCI-e slot, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB922UAGS-5HPacD-NM

5Ghz integrated 802.11ac Tripple Chain AP/Backbone/CPE, 3xRPSMA connectors, 2000mW TX power, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB921UAGS-5SHPacT-NM

5Ghz integrated 802.11ac Dual Chain AP/Backbone/CPE, 2xRPSMA connectors, 2000mW TX power, Gigabit Ethernet, waterproof metal enclosure
http://routerboard.com/RB921UAGS-5SHPacD-NM


RB911G-5HPacD
720Mhz CPU, 128MB RAM, 1xGigabit Ethernet, onboard 1000mW 802.11ac Two Chain 5Ghz wireless, RouterOS L3
http://routerboard.com/RB911G-5HPacD


RB922UAGS-5HPacD
720Mhz CPU, 128MB RAM, 1xGigabit Ethernet, 1xSFP cage, 1xminiPCI-e, 1xSIM, onboard 1000mW 802.11ac Two Chain 5Ghz wireless, RouterOS L4
http://routerboard.com/RB922UAGS-5HPacD


R11e-5HacD
5Ghz miniPCI-express, 802.11ac dual chain, 500mW, 2x MMCX
http://routerboard.com/R11e-5HacD

2

A warm welcome to the new members of the family! I am (im)patiently waiting for the store availability of the mAP and the NetMetal.

I have a question though: which antennas would you recommend for pairing with the 3 chain NetMetal, for an outdoor wide area PtMP network?

Στάλθηκε από το GT-I9100 μου χρησιμοποιώντας Tapatalk

3

It’s all already on routerboard.com store!

I can’t suggest one 3x3 antenna because actually I never searched that.

4

http://www.itelite.net/en/Katalog/3x3-MIMO-Antennas/

5

Hi All,

Maybe stupid question, but are the new 802.11ac routerboards backward compatible with 802.11n devices on 5Ghz?

Thanks for clarification…

6

Just a quick note, the new CRS109-8G-1S-2HnD-IN is not AC wireless. Sadly the mAP isn’t either.

7

Yes, of course, they support legacy 802.11n as well. There is a combined ac/n mode as well.

8

And where is writed which are “ac” models? :open_mouth:
"August new products, “ac” and others… "

9

Having “ac” on indoor products are non-sense, because you can interfer yourself with CPE client if you use more than 20+20MHz channel…

10

What antennas can we use with the 3x3 radios ?

11

Hello,

i need to buy a new AP for my Wirless and home use indoor…
i want to buy the new R11 with 802.11ac… they fall back to 5ghz n is it right ? ..

what do you think about this interaface for indoor home use in a house ???
is 500mW too much gainpower for organic brains ??? :smiley:

can i use it or is it toooo much for the healthy ?

12

802.11ac products can fall back to n rates, they will work with older devices.
The output power can be adjusted. You can lower it from the settings and check if you have good coverage.