Hi all,
I have successfully set up a guest network and all is working well, however whenever I try to add a simple queue to limit traffic on the guest network the queue shows up but doesn’t work. I’m sure I am missing something fairly simple but I’m not sure what exactly.
I’ve included the config which doesn’t have the queue. I’m hoping someone maybe be able to add it and explain the process.
Thanks.
BTW… Yes there are 3 WANs in the config and they seem to work fine independent of each other. We housesit a lot and often in places where the internet is shocking or the owner’s modem isn’t up to par. So having 3 WANs is easy for us to plug and play regardless of the owner’s provider.
# 2025-05-30 18:01:05 by RouterOS 7.19.1
/interface bridge
add admin-mac=xx:xx.xx:xx:xx:xx auto-mac=no comment=defconf name=bridge \
port-cost-mode=short
/interface ethernet
set [ find default-name=ether1 ] comment=WAN-LTE
set [ find default-name=ether2 ] comment=WAN-DHCP
set [ find default-name=ether3 ] comment=WAN-PPPoE
set [ find default-name=ether4 ] comment=LAN
/interface wifi
set [ find default-name=wifi1 ] channel.band=5ghz-ax .skip-dfs-channels=all \
.width=20/40/80mhz comment="5G AX" configuration.country="New Zealand" \
.mode=ap .ssid=NeverUMind disabled=no security.authentication-types=\
wpa2-psk,wpa3-psk .encryption=ccmp .passphrase=xxxx
set [ find default-name=wifi2 ] channel.band=2ghz-ax .skip-dfs-channels=\
10min-cac .width=20/40mhz comment="2.4G AX" configuration.mode=ap .ssid=\
NeverUMind disabled=no security.authentication-types=wpa2-psk,wpa3-psk \
.encryption=ccmp .passphrase=xxxx
/interface vlan
add interface=ether2 name=DHCP_v10 vlan-id=10 use-service-tag=yes
add interface=ether3 name=vlan10 vlan-id=10 use-service-tag=yes
/interface wifi
add configuration.mode=ap .ssid=NeverUMind-IoT datapath.client-isolation=yes \
disabled=no mac-address=xx:xx:xx:xx:xx:xx master-interface=wifi2 name=\
2.4G-IoT security.authentication-types=wpa2-psk .encryption=ccmp \
.passphrase=xxxx
add configuration.mode=ap .ssid=NeverUMind-Guest datapath.client-isolation=\
yes disabled=no mac-address=xx:xx:xx:xx:xx:xx master-interface=wifi2 \
name=2G-Guest security.authentication-types=wpa2-psk,wpa3-psk \
.encryption=ccmp .passphrase=xxxxx
add configuration.mode=ap .ssid=NeverUMind-Guest datapath.client-isolation=\
yes disabled=no mac-address=xx:xx:xx:xx:xx:xx master-interface=wifi1 \
name=5G-Guest security.authentication-types=wpa2-psk,wpa3-psk \
.encryption=ccmp .passphrase=xxxx
/interface pppoe-client
add add-default-route=yes disabled=no interface=vlan10 name=pppoe-1 password=\
password use-peer-dns=yes user=username
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254 comment=Main
add name=dhcp_pool1 ranges=10.10.10.2-10.10.10.254 comment=IoT
add name=dhcp_pool2 ranges=10.10.20.2-10.10.20.254 comment=Guest
/ip dhcp-server
add address-pool=default-dhcp interface=bridge lease-time=10m name=defconf
add address-pool=dhcp_pool1 interface=2.4G-IoT lease-time=10m name=dhcp1
add address-pool=dhcp_pool2 interface=2G-Guest lease-time=10m name=dhcp2
add address-pool=dhcp_pool3 interface=5G-Guest lease-time=10m name=dhcp3
/interface bridge port
add bridge=bridge comment=defconf interface=ether4 internal-path-cost=10 \
path-cost=10
add bridge=bridge comment=defconf interface=ether5 internal-path-cost=10 \
path-cost=10
add bridge=bridge comment=defconf interface=wifi1 internal-path-cost=10 \
path-cost=10
add bridge=bridge comment=defconf interface=wifi2 internal-path-cost=10 \
path-cost=10
/ip firewall connection tracking
set udp-timeout=10s
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ipv6 settings
set max-neighbor-entries=15360
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add interface=pppoe-1 list=WAN
add interface=DHCP_v10 list=WAN
/interface ovpn-server server
add mac-address=xx:xx:xx:xx:xx:xx name=ovpn-server1
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
add address=10.10.10.1/24 interface=2.4G-IoT network=10.10.10.0
add address=10.10.20.1/24 interface=5G-Guest network=10.10.20.0
add address=10.10.20.1/24 interface=2G-Guest network=10.10.20.0
/ip dhcp-client
# Interface not active
add comment=defconf interface=ether1
/ip dhcp-server network
add address=10.10.10.0/24 dns-server=1.1.1.1,1.0.0.1 gateway=10.10.10.1
add address=10.10.20.0/24 dns-server=1.1.1.1,1.0.0.1 gateway=10.10.20.1
add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.1 gateway=\
192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan type=A
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward in-interface=2.4G-IoT out-interface=bridge
add action=drop chain=forward in-interface=2G-Guest out-interface=bridge
add action=drop chain=forward in-interface=5G-Guest out-interface=bridge
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ip ipsec profile
set [ find default=yes ] dpd-interval=2m dpd-maximum-failures=5
/ip service
set ftp disabled=yes
set telnet disabled=yes
set www disabled=yes
set ssh port=2206
set api disabled=yes
set api-ssl disabled=yes
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
33434-33534 protocol=udp
add action=accept chain=input comment=\
"defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=input comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
add action=accept chain=forward comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment=\
"defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=\
500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=forward comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
/system clock
set time-zone-name=Pacific/Auckland
/system identity
set name="Home Router AX"
/system ntp client
set enabled=yes
/system ntp server
set broadcast=yes enabled=yes manycast=yes multicast=yes
/system ntp client servers
add address=time.cloudflare.com
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool romon
set enabled=yes