Back To Home VPN - spamming logs when disconnected

RouterOS General
1

Hello,
I have recently set up Back To Home VPN using the mobile app and it’s working very well, however I noticed that consistently around every 2 minutes (± 10 seconds) there seems to be this message added to Log (I am not trying to connect at this time! the vpn is not connected!)

back-to-home-vpn: [peer2] <WIREGUARDPEERPUBLICKEY>: Handshake for peer did not complete after 20 attempts, giving up

where instead of there’s the public key.

When I disabled and revoked BTH VPN in IP > Cloud > BTH VPN the message went away, but it of course removed my access. I do not have other WireGuard interfaces / peers, only BTH.

I observed this issue on a hAP ax2 running RouterOS 7.15 and RouterBOARD Firmware 7.15.

2

I had the same problem with wireguard log spam. We solved it by add !wireguard in log. → http://forum.mikrotik.com/t/log-show-to-much-info-ver-7-14-3/176201/1
You can use terminal method by rextended or winbox way by me (follow picture). Both do the same.

3

Disappointing that MT did not fix this well known issue for the release of 7.15.