Bandwidth Limitation

RouterOS Wireless Networking
1

Hello

I’ve got a question , we want to prepare WIFI point-to-multipoint service for some customers.

we’ve got internet service , a PPPoE router & a RB433AH with wireless 5Ghz antenna in our office ( ISP ).
The RB433AH sets up on “AP Bridge” mode.

Our customers got SXT 5HnD & all of them are set up on “bridge” mode.

Now all customers got PPPoE client in their CPEs & PPPoE client connected to our PPPoE router & they have access to the internet.
So we want run bandwidth limitation for customers in our Mikrotik ( RB433AH ).

So could you help me how to do this ?
I attached a diagram of our network for better understanding in this mail.

Best Regards
Drawing1.pdf (203 KB)

2

You could setup the PPPoE ip pool on the 433 AP and in pppoe secrets set bandwidth limits for each clients.

3

Dear Sir

Thank you for your update.

I want all wireless clients connect to our cisco PPPoE router & the RB433AH can bandwidth limits for each clients.
Is it possible ?

Kindest Regards

4

There are a couple of ways to do this.
Simple Queues or PCQ
http://wiki.mikrotik.com/wiki/Manual:Queue

5

Can the bandwidth limits be done on the cisco router?

6

Dear my friends

First Simple Queues and PCQ

I read the Simple Queues & PCQ in WIKI website but i think can’t use those features because all customers connect via PPPoE connection & Simple Queues works with Dst. IP address.

I can’t Bandwidth Limitation in our PPPoE router.

Is it possible to limit customers interface in RB433AH ?

Best Regards

7

I use 433ah’s for PPPoE authentication with bandwidth limiting on a routed network with OSPF,