Hello Guys,
Can anyone help with the BaseBox5 P2MP AP & SXT Lite5 CPE configuration? I’ve Basebox5 with 16dB Sector mount on 90 foot height tower, RB450G as principal router to manage my clients and SXT Lite5 for my clients around 1/2km away with clear LOS.
What is the best system, pppoe or anything else for good WISP?
What is the maximum number of CPE that a single Basebox5 can handle without any problem?
What is the maximum number of Clients with SXT Lite5 & Sextant CPE that a single RB450G (Principal Router) can handle if I use 3X Basebox5 with sectors?
Thanks a lot.
For me, and do not ask why:
What is the best system, pppoe or anything else for good WISP?
PPPoE is the best.
What is the maximum number of CPE that a single Basebox5 can handle without any problem?
160 with dual polarization CPE
What is the maximum number of Clients with SXT Lite5 & Sextant CPE that a single RB450G (Principal Router) can handle if I use 3X Basebox5 with sectors?
3 Basebox = 160 * 3 = 480 CPE
The RB450G used as simple Router can route till 100M full duplex without appreciating excessive delay.
If you use RB450G as PPPoE server, it can handle 200 CPE at MAX without appreciating excessive delay.
If you put more client/bandwith over what I suggest, you find the solution for not have delay using RB1100AHx2
Dear Rextended,
Thanks for your replay. I’ve only 20Mbps Fiber Optic Bandwidth as backhaul connection. I may have maximum of 100 CPE.
So RB450G will be sufficient for me, am I right? can you please give me any configuration tutorial how to connect 3X Basebox5 in RB450G as PtMP AP mood?
Thanks a lot.
It’s so much complex to make a guide for you, I suggest to you to frequent one MikroTik course from your device seller…
(oh, very bad english, sorry…)
Your advice is appreciated but there is no MTCWE course available in my country. Can you please give me any link where i can get some idea about ptmp ap configuration?
Regards,