BaseBox5 PtP 25km wireless link

RouterOS Wireless Networking
1

Hi folks.

Recently I install a pair of RB912 (BaseBox5) with ARC Wireless 30dbi antenna for a PtP 20km, I’m new using it, but I have a questions about.

  1. How can turn on the leds in the AP side at moment to align antenna similiar to ubiquiti ones ?

  2. The Antennas are correctly aligned but only has -79 or -80 signal strength, same link with Rocket M5 and 30dbi has -65 signal quality.
    I’m using bridge → station pseudobridge – wds dynamic mesh in both sides.

Thanks for reading.

Fco.

2

Hello, i asked couple weeks ago how could i use the SXT’s Leds in the following situations, but nobody answered to me.But it would be very useful like on the Ubiquiti devices.

I think you should try out this setting:

Ap side:mode:bridge
Client side: station-bridge

First with 802.11 N, and after with NV2 as well.

3

How did you configure the power and regulatory domain settings? Did you enable both antenna chains?