I need your help to deploy a PTP Backhaul (30mbps) connection between two sites with Basebox5 with Dish
’ for my WISP. I’ve researched lots of forum and tools for the Backhaul but didn’t get final destination. I’ve calculated by using AirLink and Radio Mobile for the Backhaul but I’m not 100% sure about the link is possible or not. So please help me. I’ve 80foot towers on the both side. Few days ago I went through the link way physically and made a survey. There are some houses or buildings about 30foot high and lots of trees maximum of 60foot high on the way of my link, that’s why I’m confused about the possibility of my link for the Fresnel Zone issue. I badly need your kind suggestions guys. There are the both sites details of the two sites. Please help me. Should I expand my towers from 80 to 90 foot or something else?
Thank you so much.
Site 1
Latitude - 24° 3’36.71"N
Longitude - 90°58’48.85"E
Site 2
Latitude - 24° 9’8.29"N
Longitude - 90°55’58.23"E
Do not worry about anything (except find a channel without noise), put two “sextant G”, or you “base box 5” with one good double polarized dish (H/V), and you have till 80Mbps link bi-directional.
Are you sure about “Sextant G” will be able to connect 7000 meters(7miles/11.34km) long distance link? As I’ve studied “Sextant G” has only 18dbi inbuilt antenna where RB911 is used. It has only 600Mhz Procesor, 32mb RAM, 30dbm wireless card inbuilt. If some how it’s possible to get link but will it be able to transmit more than 50mbps bandwidth from my site1 to site2?
one more question, how can I find a channel without noise, please advice me the easiest way.
Thank you so much.
Can you please write me about the configuration step by step guide of (both H/V chain enabled, 20+20MHz using NV2!)? can you transmit 50mbps on your link?
(both H/V chain enabled, 20+20MHz using NV2!)