Hi Guys,
A client of mine would like to track wifi devices in and around their offices.
I can see the wifi snooper is something i am after, but i need to switch to station mode after starting the snooper from command line. Is this something i can add into the CLI?
Ideally i would like to get this data back into a database, with the GPS location of the unit, time, date, etc. Any ideas would be greatly appreciated.
FREQ ADDRESS SIG SNR OF-FREQ OF-TRAF BW SSID
0 N 2412MHz 08:76:FF:DA:C4:D9 -52 45 0% 0% 0bps
1 AN 2437MHz 58:93:96:30:1B:68 -35 62 4.9% 97.3% 81.6kbps
2 2447MHz 10:68:3F:36:BC:D8 -93 4 0% 0% 0bps
3 2422MHz 04:46:65:75:86:BF -48 49 0% 0% 0bps
4 A 2427MHz 00:15:70:37:BC:08 -45 52 0% 0% 0bps
5 2447MHz 84:38:38:EB:E4:6D -80 17 0% 0% 0bps
6 2447MHz D8:57:EF:78:86:CC -90 7 0% 0% 0bps
7 2437MHz 84:7A:88:04:C6:FA -59 38 0% 0% 0bps
8 A 2462MHz B0:45:19:24:E7:A7 -62 35 0% 0% 0bps
9 AN 2412MHz 00:0C:42:49:97:75 -87 10 0.5% 26% 4.6kbps
10 A 2452MHz 00:15:70:37:C5:E8 -84 13 0.2% 11.2% 1792bps
11 2432MHz 12:A4:68:26:85:C8 -86 11 0% 0% 0bps
12 2427MHz CC:3A:61:AF:59:E0 -46 51 0% 0% 0bps
13 2462MHz F0:72:8C:9E:91:37 -44 53 0% 0% 0bps
14 A 2427MHz 4C:7C:5F:BD:A3:D0 -54 43 0% 0% 0bps
15 2412MHz 56:CE:6B:EF:5C:27 -86 11 0% 0% 0bps
16 2442MHz AA:5C:C4:A7:37:83 -37 60 0% 0% 0bps
17 2447MHz 38:48:4C:31:4E:87 -50 47 0% 0% 0bps
18 2432MHz 70:3E:AC:B0:BB:90 -83 14 0% 0% 0bps
19 A 2452MHz AC:FD:EC:CE:A2:22 -79 18 1.1% 44.3% 9.0kbps
20 A 2452MHz 48:43:7C:DC:D5:7B -93 4 0.5% 22.1% 4.5kbps
