Hi, i am testing in LAB with a network with OSPF, MPLS, VPLS and everything goes perfectly. But i don’t know what is the best way to give more than one service in the customer router and split them in diferents ethernet ports. Ex: ether1: WAN, ether2: LAN-Internet, erher3: LAN-IPTV.
I know that it is posible with VLANS, but i dont know how.
This is my topology:
One Core-router CRS1016 (a)
|
Four Switches CRS212 (b)
|
A lot of RB 2011 (c)
a) core router is actually using 4 sfp interface for every Switch CRS212
The OSPF Is with ptmp type and one diferente Area for every RB2011(c) network /30.
Here i have one VPLS tunnel for every 2011.
I have 2 VLANs into the VPLS and these are diferents bridges.
One bridge for dhcp (future IPTV) and another bridge with pppoe server for the internet.
b) this switches are in transparency way
c) in this 2011 box i use sfp for wan and the ethernets for customers.
Here is the VPLS end of tunnel, and it have the vlans inside itself.
If i put the two vlans in a bridge. I can connect suscesfully with pppoe and recieve an IP address from the dhcp server in my laptop too.
But if a put a router in the customer home. Y can’t see the VLANs.
I can connect only if i use the wan port.
How i can see these vlans in the customer router and split them in diferents bridges / ports.?
Thanks.
Enviado desde mi SM-N900 mediante Tapatalk