BGP 3.30 Routing-Test experience

RouterOS Forwarding Protocols
1

Hi,

as MT seems to iron out some long-time Bugs in their BGP-Implementation
it’s time to upgrade.

I’ve had some problems before 3.28 where sometimes
the network announcement (with network statement) vanishes.
This seems to be fixed in 3.28. In 3.28 I’ve had one router crashing
once in a way that routing works but it was impossible to log in to this router.
Reboot helps but I’ve to drive to this router. So this version was some way
better but not as stable as a bgp-router has to be.

So now we’re on 3.30 routing-test looking forward what happens.

Running for 6 hours now.

Our uplink-config is 3 RB1000. Each of them getting full feed interconnected with IBGP.
All three running OSPF to inject default route into our network.

So what’s your experience with 3.30?

Stefan

2

Running without problem - 2 bgp routers also talk ospf internal been fine for a week now.

Scott

3

Hi,

same here. Running for 13 days now without a problem.

Stefan

4

EBGP with a full routing table + IBGP ~1000 routes

/system resource> pr
                   uptime: 1w4d10h18m57s
                  version: "3.30"
              free-memory: 1531788kB
             total-memory: 1945780kB
                      cpu: "Intel(R)"
                cpu-count: 2
            cpu-frequency: 3000MHz
                 cpu-load: 3
           free-hdd-space: 199885kB
          total-hdd-space: 242442kB
  write-sect-since-reboot: 13926
         write-sect-total: 320396
        architecture-name: "x86"
               board-name: "x86"