vanish
January 26, 2014, 9:29pm
1
Hi All!
I have RB2011LS:
RouterOS v6.7
current-firmware: 3.10
I run a BGP session and want to pass about 800 networks from RB2011 to ASR1002 with /32 mask.
Then i try do it, the routerboard annonce only 200 networks and generates error - “failure: number of BGP networks is limited to 200”.
Please tell me - is there any way to get around this limitation?
P.S. Aggregation offer not need.
I thought the only solution to your problem is that you have to replace your router to some higher versions that allows as many networks as you needed.
vanish:
Hi All!
I have RB2011LS:
RouterOS v6.7
current-firmware: 3.10
I run a BGP session and want to pass about 800 networks from RB2011 to ASR1002 with /32 mask.
Then i try do it, the routerboard annonce only 200 networks and generates error - “failure: number of BGP networks is limited to 200”.
Please tell me - is there any way to get around this limitation?
P.S. Aggregation offer not need.
Post your bgp config , both sides, Routerboard as well as Cisco… chances are that you have Max Prefix limit defined as 200…
vanish
March 23, 2014, 10:11am
4
Thank you for your replyes.
Solved the problem of prescription static routes.