I have two Canopy BH20 links bonded together using an RB493 at each end. I used balance-rr. It works super groovy except one odd issue. I have +50% packet loss pinging or accessing any of the 4 BH20 radios, even from the hard wired side. When I get ICMP replies on the ethernet side, its 1ms as expected, I just get on average, half the replies. Traffic flowing thru the links is flawless including ICMP from RB493 to RB493 attached to these BH20’s. What the heck did I do wrong? Any help is appreciated as I cannot find anything in previous posts on this.
Thanks in advance!
Tim