bonding 2 wds link problem

RouterOS Wireless Networking
1

mt1 (pc, 2x r52, mt 3.30)

  1. add ip 1.1.1.1 to Ether1

  2. create Bridge1

  3. set wlan1 Mode=ap-bridge, SSID=b1, Freq=5200, WDS mode=static-wds, WDS Default Bridge=none

  4. set wlan2 Mode=ap-bridge, SSID=b2, Freq=5800, WDS mode=static-wds, WDS Default Bridge=none

  5. create Bonding1, set Slaves: wds1, wds2, Mode: balance rr, Link Monitoring: arp, ARP IP Targets: 1.1.1.2

  6. set Ports: Bonding1, Ether1 at Bridge1


    mt2 (rb433ah, 2x r52, mt 3.30)

  7. add ip 1.1.1.2 to Ether1

  8. create Bridge1

  9. set wlan1 Mode=station-wds, SSID=b1, Freq=5200, WDS mode=static-wds, WDS Default Bridge=none

  10. set wlan2 Mode=station-wds, SSID=b2, Freq=5800, WDS mode=static-wds, WDS Default Bridge=none

  11. create Bonding1, set Slaves: wds1, wds2, Mode: balance rr, Link Monitoring: arp, ARP IP Targets: 1.1.1.1

  12. set Ports: Bonding1, Ether1 at Bridge1



    2 wireless wsd links are linked, signal are good, -60dbm. At mt2 Bonding1 interface is disabled. I check that at Bridge1 in Ports.
    I check forum archives but didnt/t help me… What i do wrong?