Bridge Filter problem on ROS 3.0 and ROS 3.1

Hardware MikroTik hardware general
1

Hi
We have ROS 3.0 on routerboard 133, and have bridged one EOIP with one Ethernet interfaces.
In bridge filter counters are only 0, and sometomis they become very large, or very small even minus.
What is for problem, I have tried checking use IP firewall checkbox, and without it, but there was no difference.
No rule works, even when I create drop all in chain forward and place it before 0, the packets pass through the bridge.
No rule drops the packets in input chain, when I told to drop all input.
Why?

Some advise or suggestions, please.
Thanks with best Regards
Karapet Aznavuryan

2

I have the same configuration on routerboard 133: sr2 with eoip and bridged with port lan. And work fine, try reset your config and reload the settings

3

rafael Thanks, For reply, But we have done it several times, but there was no use. (