Bridge Problem with RB 532

RouterOS General
1

Hi! i have a routerBoard 532 and with a daugtherBoard i put 3 wiereless interface that connect 3 remote sites in 5,8 ghz. I use dynamic wds for create a transparente bridge with the other sites and all equipment are in the 192.168.1.0 network…
this is a small sketch of the network


MKT Site 1
192.168.1.100
|
|
|
MKT Site 2
192.168.1.101 ------------------- MKT Site 3 - 192.168.1.103
|
|-----------------
| |
PC 1 PC2

the problem is: the PC1 and PC2 see the site 1 and site 2 with the ip of site 2 (192.168.1.101) the same when I see the traffic from the site 1 and 3 I see that all come from 192.168.1.101 like the Site 2 is working like a router but i configure it like a bridge.

Anybody can help me ??

PD: sorry about my english i hope that anyone understand me. :wink:

Gabriel Monsalvo.
Tucuman, Argentina

2

You really need to post more of your configuration; however, a Masq-NAT rule without enough specifiers might be catching the traffic. Remember that all IP traffic going through a bridge will be bubbled up (or routed through) the IP firewall/nat/mangle rules.

3

Thanks!!! from previous configuration i have a masquerade rule, I remove it and solved!

thanks again.