Bridge VLAN VRRP

RouterOS Beginner Basics
2

  1. No it does not seem correct…
    I would setup VRRP on SFP1, on SFP2 and on SFP3 (Three different VRRPs) for CCR1 and CCR2… CCR1 would be set with higher Priority in order to be the Master and in case something happened to SFP1 of the CCR1 then SFP1 of CCR2 would start…

  2. When working with VLANs you dont set the DHCP to the Bridge but to the VLAN or VLANs Interfaces…

Some sources you should check:
https://wiki.mikrotik.com/wiki/Manual:Interface/VRRP
https://wiki.mikrotik.com/wiki/Manual:VRRP-examples
http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1