Did you follow this guide… http://forum.mikrotik.com/t/using-routeros-to-vlan-your-network/126489/1
By the way, dont tell me another person that likes mixing apples and oranges.
if your are going to run vlans and bridge,
then make all subnets vlan on one bridge and dont have the bridge do anything
in other words only vlans get ip pool, ip address, dhcp-server, dhcp-server network etc…
In any case you need to read the link make any adjustments and then
post your full config /export (minus the serial number and any public WANIP info)