bridged EoIP doesn't work

RouterOS General
1

Hello,

I have 2 networks conneted by rb's with mikrotik.

First:

[admin@first] > /interface eoip print
Flags: X - disabled, R - running
0 R name="tunel_1" mtu=1500 mac-address=FE:97:8F:93:AA:EC arp=enabled remote-address=192.168.3.2 tunnel-id=1

I have 2 bridge: lan and wan

[admin@first] > /interface bridge port print
Flags: X - disabled, I - inactive, D - dynamic

INTERFACE BRIDGE PRIORITY PATH-COST

0 ether1 lan 128 10
1 szkola-pkp lan 128 10
2 szkola-gralbet wan 128 10
3 tunel_szkielet wan 128 10
4 D wds1 lan 128 10
szkola-gralbet is atheros card connected in station-wds mode.

ping to 192.168.3.2 works


Second:

[admin@second] > /interface eoip print
Flags: X - disabled, R - running
0 R name="tunel_szkielet" mtu=1500 mac-address=FE:00:04:4F:D5:CB arp=enabled remote-address=192.168.3.3 tunnel-id=1

on this rb i have too two bridges: lan and wan
[admin@second] interface bridge> /interface bridge port print
Flags: X - disabled, I - inactive, D - dynamic

INTERFACE BRIDGE PRIORITY PATH-COST

0 ether1 lan 128 10
1 pkp-jeglia lan 128 10
2 pkp-szkola lan 128 10
3 ether2 wan 128 10
4 tunel_szkielet wan 128 10

ping to 192.168.3.3 works

but from device connected to ether2 rb 'second' can't ping rb connected to 'first' rb by szkola-gralbet interface. What's wrong?? Can anybody help me?

2

after upgrade to 2.9.20 tunnel and bridge works fine

3

Running fine on my test systems on 2.9.6 as well…

4

I had 2.9.10 and that configuration didn’t work.