I’ve created vlan100 on 3 separate physical ports to bridge traffic through on vlan100.
Vlan100a to port 8
Vlan100b to port 3
Vlan100c to port 4
Bridge: Vlan100a, Vlan100b, Vlan100c.
All three vlan interfaces are getting mirrored… This is a CCR1072, fw6.37.3, what could be causing this?
Will the bridge just act as a HUB? How do I get it to act like a switch? , I really think this is a software issue, but just throwing this out there to make sure
I’m not crazy…