Hi
Trying this forum, since we are running out of options…
We have a 3 AP Bridge setup,and most of the clients are routed Stations.
We have a problem with all of our transparent bridges, if one initiates traffic, all the other follow,and then slowing the connected ap’s and the client itself.
We have an identical setup in both ends, to a fully working network… The only difference is a management vlan and ip attached to the bridge. Without vlan nothing changes.
On the AP i see all Dynamic WDS’s run the same amount of traffic.
On the client i see that Ether TX and Wlan RX are identical, they idle at 400-3000 kbit..
Clients run as Station WDS
Any input on where to look would be great.
M-sport