i read this in the manual
[admin@Remote] interface bridge> add forward-protocols=ip,arp,other
... disabled=no
[admin@Remote] interface bridge> print
Flags: X - disabled, R - running
0 R name=“bridge1” mtu=1500 arp=enabled mac-address=00:00:00:00:00:00
forward-protocols=ip,arp,other priority=1
but if i look for the forward-protocols
the command is not there anymore… i’m running 2.9.8
any comment
use brouting on 2.9
Maxi
broute is for routing some and bridging other packets…
what i need to know is this…
in the 2.8 and also still in the manual you had to say what protocols you wanted to bridge…
i have a arp problem…
so i wanted to make sure ,ip and arp were bridged…
do i now use broute for that???
do i just make a rule that says this to make sure everything is bridged???
/interface bridge broute add in-bridge=Colt-ANR-Bridge action=accept