I have noticed that if you right click a device listed in the “Wireless Tables” under the Registration tab, you have the option to MAC ping, Ping, or MAC Telnet, or Telnet. AS well as some others.
I am assuming that this would reffer to the hardware device that is connected? Ie the client?
Well, the MAC Ping, Ping, and Telnet ussually go to another IP address other then the one of that device, It “seems” as if it is “last Ip” since it changes between the dervices that would be active, such as a media center extender, or a VoIP phone on that particular client.
MAC Telnet has worked every time to telnet to that particular client.
Nework Topology:
Both ends are running 3.1
2 clients connected in STATION WDS Mode to one AP
Clients are RB 112’s Connecting to a RB532A
There is a bridge in place.
Running XR5 on 532, and one RB 112, other RB112 has a R52H
P.s. Sorry I could not find a V3 bug reporting area if this isn’t the right forum, please move post.