Hi to all
Does anyone know why Mikrotik doesn’t send Calling-Station-Id in accounting requests when using EAP + RADIUS.
Accounting request for start
Tue Nov 6 09:43:10 2012
Service-Type = Framed-User
NAS-Port-Id = “wlan1”
User-Name = “testUser”
Acct-Session-Id = “82200004”
Acct-Multi-Session-Id = “00-0B-6B-4E-DF-8B-F8-0C-F3-22-35-40-82-20-00-00-00-00-00-04”
Acct-Authentic = RADIUS
Acct-Status-Type = Start
NAS-Identifier = “TestNAS”
Acct-Delay-Time = 0
NAS-IP-Address = 172.16.170.4
Acct-Unique-Session-Id = “da7eb09d1bf5018e”
Timestamp = 1352191390
Accounting request for interim update
Tue Nov 6 09:45:43 2012
Service-Type = Framed-User
NAS-Port-Id = “wlan1”
User-Name = “testUser”
Acct-Session-Id = “82200005”
Acct-Multi-Session-Id = “00-0B-6B-4E-DF-8B-F8-0C-F3-22-35-40-82-20-00-00-00-00-00-04”
Acct-Authentic = RADIUS
Acct-Status-Type = Interim-Update
Acct-Session-Time = 60
Acct-Input-Octets = 17831
Acct-Input-Gigawords = 0
Acct-Input-Packets = 103
Acct-Output-Octets = 82530
Acct-Output-Gigawords = 0
Acct-Output-Packets = 101
NAS-Identifier = “TestNAS”
Acct-Delay-Time = 0
NAS-IP-Address = 172.16.170.4
Acct-Unique-Session-Id = “759724ef7ccfe906”
Timestamp = 1352191543