Can anyone guide me how to configure Dual WAN Load balancing and Failover with CCR1036?

RouterOS Beginner Basics
1

I have 2 WANs
Ether9-Wan1 with 5mb
Ether10-Wan2 with 10mb

So my total speed will be 15mb.

2

Use PCC. Here are a few resources:

https://wiki.mikrotik.com/wiki/How_PCC_works_(beginner)

https://wiki.mikrotik.com/wiki/Manual:PCC

3

Hi AldoJimenez,

It is a good explanation, But I still don’t understand, If I have many VLAN one Ether1, 2, 3, 4 as Bridge-Trunk. As in the example just said only one LAN.

1- How to modify LAN to Many VLAN?
2- Will the PCC work good in of My two WANs?

THANKS

4

Please have a look at all the other topics that can be found on the wiki:
https://wiki.mikrotik.com/wiki/Manual:Interface/VLAN

5

Yes this will work with a multi VLAN setup as long as routing is setup correctly. Search for Multiple WAN Load Balancing with PCC and you will find several walkthrough’s for 2, 3 and 4 WANs.