Can MK do this?

RouterOS General
1

I would like to ask if MK is capable of what I want.

Here is the scenario:

I have 2 ISPs.
ISP1 has issued me 2 IP’s to use. (203.177.102.5 and 203.177.102.6)
ISP2 has issued me 2 IP’s to use. (222.126.122.213 and 222.126.122.214)

(please take note that the IP’s above are just dummy IP’s they are not my real IP adds)

Now I connect the ISP1 modem to WAN1 on the router and I also connect the ISP2 modem to WAN2 on the router.

I have 2 internal clients. (192.168.1.1 and 192.168.1.2)
Would it be possible to manual assign 192.168.1.1 to use the IP 203.177.102.5 and 222.126.122.213?
And also manual assign 192.168.1.2 to use the IP 203.177.102.6 and 222.126.122.214.

And also have an SNMP feature so that I can monitor the traffic on the router via MRTG?

2

Yes, use policy routing. Read the manual about it, if you can’t get it to work after reading and applying then post your relevant configs.

Sam

3

http://forum.mikrotik.com/viewtopic.php?t=2761&highlight=

Cheers…

4

Quoting on my first message above:
“Would it be possible to manual assign 192.168.1.1 to use the IP 203.177.102.5 and 222.126.122.213”

What I mean is that 192.168.1.1 will use the public IP 203.177.102.5 and 222.126.122.213 either as load balanced, carouseled and will use a specific public IP either 203… or 222… when 1 link is down.