CANNOT REACH PC BEHIND AP AND PC BEHIND CPE

RouterOS Wireless Networking
1

Hi Support,
I am having problem a set of Mikrotik Routers 1 AP and 3 Stations and need some support.
Will send my support.rif file later.

I have been trying to configure this radio for the past 3days and I seem not to be able to get it to work. I have been configuring Mikrotik radios and I really like the stability and secure features that comes with it as with the linux interface it has.

My problem I am having now is I have configured the AP and the Station to see each and its only the wireless interface that sees each other but the ethernet internet cannot ping each other. I have place one Pc at the AP end of the setup and the another Pc at the Station end of the setup. I usually configure them such that both computers can ping each other but this is not working for me this time so please help me to set it up.

2

This is the basic concept you are looking for. http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks
You will want your AP to be a AP Bridge though instead of just bridge since you are connecting more than one client.

3

You can also figure it out from here: http://wiki.mikrotik.com/wiki/How_to_create_a_transparent_AP_with_more_than_1_wireless_cards

4

or… old school routing: http://forum.mikrotik.com/t/udp-in-bandwidth-test-between-subnets/16972/1

5

Your link has nothing to do with the topic

6

Hi
Thank you so much.. the problem is sloved now.