Hi,
I have 2 hAP2 routers connected in 1 network A-B. When I updated the first one everything was fine but the second one showed an error:
ping update.mikrotik.com
invalid value for argument address:
invalid value of mac-address, mac address required
invalid value for argument ipv6-address
while resolving ip-address: could not get answer from dns server
My second router is connected through ether1 (not WAN) because I want to have the whole house covered by the same WiFi network. Here is a log from my router. I’m pretty noob in network setting, can someone help me, please? Here is a log from my router setting:
[admin@MikroTik] > /export hide-sensitive
jan/02/1970 02:33:12 by RouterOS 6.43.2
software id = 7I8X-6TBX
model = RBD52G-5HacD2HnD
serial number = 8FDE09348F20
/interface bridge
add admin-mac=B8:69:F4:14:BB:9E auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-Ce country=“czech republic” disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=Pejchal_2GHz wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40/80mhz-Ceee country=“czech republic” disabled=no distance=indoors frequency=auto mode=ap-bridge ssid=Pejchal_5GHz wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk,wpa2-psk mode=dynamic-keys supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.89.10-192.168.89.254
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.89.2/24 comment=defconf interface=ether2 network=192.168.89.0
add address=192.168.89.2/24 interface=ether1 network=192.168.89.0
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf gateway=192.168.88.1 netmask=24
add address=192.168.89.0/24 gateway=192.168.89.2 netmask=24
/ip dns
set allow-remote-requests=yes servers=192.168.89.1,10.164.60.177,8.8.8.8
/ip dns static
add address=192.168.89.2 name=router.lan
/ip firewall filter
add action=accept chain=forward comment=“defconf: accept in ipsec policy” ipsec-policy=in,ipsec
add action=accept chain=forward comment=“defconf: accept out ipsec policy” ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment=“defconf: fasttrack” connection-state=established,related
add action=accept chain=forward comment=“defconf: accept established,related, untracked” connection-state=established,related,untracked
add action=drop chain=forward comment=“defconf: drop invalid” connection-state=invalid
add action=drop chain=forward comment=“defconf: drop all from WAN not DSTNATed” connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment=“defconf: masquerade” ipsec-policy=out,none out-interface-list=WAN
/ip route
add distance=1 gateway=192.168.89.1
/system routerboard settings
set silent-boot=no