our set-up
ISP–modem-------router----------------mikrotik RB600----ethernet2
I I I I
PPOE WAN=PPOE WLAN ether2=192.168.0.254/24
LAN=192.168.2.1 netmask=255.255.255.0
NETMASK=255.255.255.0
MODE=DHCP
What must be our configuration for ETHER1 of POE port in order for us to access the internet? Please reply immediately. Thank you very much and more power!
That is such a basic configuration that is even described in the Mikrotik Manual.
Remember just one thing. When you establish PPPOE connection, you set all routing on PPPOE interface, not physical interface pppoe is set on.
our set up
ISP provided us with a modem pppoe mode
next is our router = WAN:ppoe mode LAN: dhcp-192.168.2.1/24
next is Mikrotik RB600 = POE port;ether1 =??? = what must be the configuration here?
= LAN port;ether2 = 192.168.0.254/24
next is our workstation connected to ether2.
that’s basically our setup… that connect to the internet..
pls correct me in case the setup is wrong. thank you very much.
pls help me, i need to make it work. pls reply.
Read the manual and lose the attitude.