Can't enable both 2.4 and 5GHz with CAPS

RouterOS General
1

HI, that’s a strange problem, configuration is done, both frequencies work with CAPS but not together,
when I press the CAP putton under wireless interface it impose me to choose which interface, and I can’t select both of them. Conseguentely I can see on CAPSman only the 2.4 (if I choose wlan1) or 5GHz, and on my phone as well the SSID corresponding. Why I have this problem?

This is a RBD52G-5HacD2HnD with 6.47.10

2

Another question, configuring CAPSman on 5GHz ch there are much less parameters available than configuring it directly on AP.

3

Did you configure the CAP manually to become a CAP?
Instead of using (tiny) screenshots, can you please post the /export of the CAP?

Regarding the parameters…that is correct. But…which one are you (really) missing?

4

try this on console

/interface wireless cap set discovery-interfaces=ether1 enabled=yes interfaces=wlan1,wlan2

capsman dedicated for indoor enterprise wireless, so no options for station, station-bridge, nv2, nstream, wds, etc. the other setting are the same.

5

Non si vede un cazzo nello screenshot, va “interpretato”
con le freccette in fondo dove si seleziona l’interfaccia wlan1 si possono aggiungere altre righe per mettere anche la seconda interfaccia

6

E’ normale, i parametri sono distribuiti tra tutte le schede del cap