Hi folks, I am new to all this and likely just doing something silly… I expect to be saying that quire bit for a while…
OK So… LAN and two managed AP’s up, third configured and tested but not physically installed yet.
Router is RB2011UiAS-2HnD updated o latest firmware.
It took me a bit of time and fiddling to set up CAPsMAN and get the APs to be recognised and configured but it seems to be ok… I expect there ill be profile changes as I learn but it working, I am using it now.
HOWEVER… The wireless interface in the router running as he manager int being discovered by the CAPsMAN.
When I set the interface to CAP mode it displays the 'Managed by CAPsMAN but the settings do not change and no new CAP interface shows up, explaining the la k of setting change but not much else.
I have tried ether2 and bridge as discovery interfaces and also Bridge as both bridge and none.
I also tried an initial interface setting of both Bridge AP and Station with both the above…
I even tried to add a CAP interface manually but if that is what is required I am going to need some help with the minimum number of settings required. I added the Bridge MAC and radio MAC but couldn’t find a radio name, other than wlan1, which I suspect inst right.
Please someone do me a huge favour and tell me how and where I am missing something obvious, or just being plain dim…
I am having a couple of other minor problems with settings and google home but I would like to deal with one thing at a time tarting with basic configuration.
Happy to post config info but A don’t know where to find it and B what is relevant… Sorry
Cheers,
Al