i have created the tunnels in the mikrotik router and i can see them been active(R) but i can ping them in the cisco.
this is what i did;
1.)
[admin@Archilles_Takoradi] > in eoip
[admin@Archilles_Takoradi] interface eoip> p
Flags: X - disabled, R - running
0 R name=“eoip-tunnel1” mtu=1500 mac-address=FE:00:90:31:CF:95
arp=enabled remote-address=10.1.18.100 tunnel-id=101
[admin@Archilles_Takoradi] interface eoip>
2.)[admin@PROVIDENT INSH] > in eoip
[admin@PROVIDENT INSH] /interface eoip> p
Flags: X - disabled, R - running
0 R name=“eoip-tunnel1” mtu=1500 mac-address=02:EE:6F:8D:EA:4E arp=enabled
remote-address=10.1.60.1 tunnel-id=101
[admin@PROVIDENT INSH] /interface eoip>
Now i gave 1. an ip of 20.12.0.1 and 2. 20.12.0.2 and i can reach these ips in the mikrotik but not in the cisco
how do i get to reach the tunnel ips in the cisco which are connected to the ether1 port of the mikrotiks