Hello,
I would like to set up 2 ssid with each one dhcp.
1 ssid (wifi-lan) in 2.4 and 5 Ghz with one dhcp and another ssid with another dhcp in 2,4Ghz.
I have one dhcp for my lan network on ether1 and wAP is on ether4.
I created virtual ap but whatever ssid I select I’m still on the same dhcp (lan network).
Can you tell me where to find a tutorial or an explain me.
Thanks.
Sorry for my english.
You need two unique datapaths configured in capsman, one for each SSID.
On the CAPsMAN Controller create two bridges, apply unique IP and DHCP combo on each bridge.
Then create two datapaths, one for each bridge.
Specify which datapath to use with which ssid (done in CAPsMAN Configuration)
CAPsMAN will then forward traffic from each SSID to it’s required bridge (assumes CAPsMAN Forwarding being used not Local Forwarding).