Is there possible to set Capsman for dual wifi ap? If I set wlan1 managed by capsman (enable cap) I cant set wlan2 too because then wlan1 is not managing by capsman anymore. Of course I have the both wlan1 and wlan2 in bridge (wlan1 is 2GHz, wlan2 is 5GHz). Finally it seems I can have only one wifi interface from one board managed by capsman. Am I right or making some mistakes in configuration? Situation...GW (capsman manager)----------ap1----------ap2.......etc (every AP has dual wifi a all wifi are in the one bridge).] Edit: Ok Ive found i can addd the both wlan and wlan2 in the cap setting but If i try add mac address of 5GHz radio to provisioning I have only red line managed by capsman in the radio (no channels, ssid…etc). It seems 5GHz radio can`t comunicate with gw because I can se no support channel…I have to resolve it.
Ok this manual helped me.
https://www.nkent.us/wiki/index.php/Wireless_networking_with_CAPsMAN_and_the_MikroTik_cAP_ac