Good part of the day.
We have 8 Access points metal 52 ac named as AP11 – AP18, ruled by CAPsMAN on hAP ac. All access points work like a bridge. We need to extend our WiFi zone and connect another two access points AP19 and AP20 to our system. But we don’t have possibility to connect them by LAN in that place. So we decided to make a bridge between AP13 and AP19. On AP19 we pushed the button “setup repeater”, wrote Address of AP13, SSID and Passphrase, then pushed “start” button. AP19 has connected to AP13. Firstly everything was ok. Then we decided to add AP20 and made settings on it like on AP19. And our CAPsMAN started disconnecting AP13 from the system. AP19 and AP20 tried to connect to AP12, but CAPsMAN disconnected AP12 like AP13. There are messages in the CAPsMAN’s log about “probably loop”. We turned off AP20, but the problem hasn’t gone. Now when we turn on AP19, it connects to AP13, CAPsMAN disconnects in turn AP13 and AP12. I don’t know what I do wrong. I’m asking for the help.