CAPsMAN vs multi VLANs configuration

RouterOS Wireless Networking
1

Hi All!

I’m using 6 standalone access points, and I want start using the CAPsMAN

Hardware:
6 x RB SXT G-2HnD (APs)
1 x RB2011UiAS (CAPsMAN)

Network description:
AP <-Trunk (VLAN 10,20,30)-> LAN switch
WLC <-Trunk (VLAN 10,20,30)-> LAN switch
VLAN 10 - management interfaces
VLAN 20 - SSID1, SSID2
VLAN 30 - SSID3

Question: is it possible to use the CAPsMAN in my environment? And if the answer is “yes”, please advise the best way to create the configuration?

Thank you very much for your help

2

yes you can

i have a setup using a bridge for each vlan in that bridge i added the vlan interface and the corresponding wlan interface (virtual ap)

provisioning and datapath on caps man would do the job automatic when adding a cap

3

thank you