Hello,
Could anyone help me to unbrick this router.
I have tried to netinstall with 6.33, 6.40.3 but nothing changed.
Console output
RouterBOOT backup booter 3.27
CCR1009-8G-1S-1S+
CPU frequency: 1200 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
trying bootp protocol... OK
Got IP address: 192.168.5.101
resolved mac address 00:15:17:3D:4E:C9
*transfer started ...........................*. transfer ok, time=1.11s
setting up elf image... OK
jumping to kernel code
Welcome to MikroTik Router Software remote installation 6.40.3
Press Ctrl-Alt-Delete to abort
mac-address: E4:8D:8C:0F:DC:02
mac-address: E4:8D:8C:0F:DC:06
mac-address: E4:8D:8C:0F:DC:01
mac-address: E4:8D:8C:0F:DC:05
mac-address: E4:8D:8C:0F:DC:00
mac-address: E4:8D:8C:0F:DC:04
mac-address: E4:8D:8C:0F:DC:08
mac-address: E4:8D:8C:0F:DB:FF
mac-address: E4:8D:8C:0F:DC:03
mac-address: E4:8D:8C:0F:DC:07
software-id: HIMP-**** key:
xK6t5JzMU*********************************************************************************oDP4NA==
Waiting for installation server...
Found server at 00:15:17:3D:4E:C9
Formatting disk......
installed routeros-tile-6.40.3
Writing configuration...
Software installed.
Press ENTER to reboot
Rebooting...
Restarting system.
Resetting chip and restarting.
RouterBOOT booter 3.33
CCR1009-8G-1S-1S+
CPU frequency: 1200 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
chmod: /flash/etc: No such file or directory
RouterBOOT booter 3.33
CCR1009-8G-1S-1S+
CPU frequency: 1200 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
RouterBOOT backup booter 3.27
CCR1009-8G-1S-1S+
CPU frequency: 1200 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup
trying bootp protocol... OK
Got IP address: 192.168.5.101
resolved mac address 00:15:17:3D:4E:C9
*transfer started ........................... transfer ok, time=0.97s
setting up elf image... OK
jumping to kernel code
Welcome to MikroTik Router Software remote installation
Press Ctrl-Alt-Delete to abort
mac-address: E4:8D:8C:0F:DC:02
mac-address: E4:8D:8C:0F:DC:06
mac-address: E4:8D:8C:0F:DC:01
mac-address: E4:8D:8C:0F:DC:05
mac-address: E4:8D:8C:0F:DC:00
mac-address: E4:8D:8C:0F:DC:04
mac-address: E4:8D:8C:0F:DC:08
mac-address: E4:8D:8C:0F:DB:FF
mac-address: E4:8D:8C:0F:DC:03
mac-address: E4:8D:8C:0F:DC:07
software-id: HIMP-**** key:
xK6t5JzMUM28oxO57************************************************txQS3ZMHN8ZLQCfK/Mhn8c3oDP4NA==
Waiting for installation server...
Found server at 1C:6F:65:AB:6B:8D
Formatting disk......
installed routeros-tile-6.33.3
Writing configuration...
Software installed.
Press ENTER to reboot
Rebooting...
Restarting system.
Resetting chip and restarting.
RouterBOOT booter 3.33
CCR1009-8G-1S-1S+
CPU frequency: 1200 MHz
Memory size: 2048 MiB
NAND size: 128 MiB
Press any key within 2 seconds to enter setup..
loading kernel... OK
setting up elf image... OK
jumping to kernel code
Starting...
Thank you!