CCR 1009 does not initialize. no netinstall

Hardware MikroTik hardware general
1

CCR keeps restarting, I can’t start netinstall. I can’t use netinstall using RS232 serial cable

Press any key within 2 seconds to enter setup..

loading kernel… OK
setting up elf image… OK
jumping to kernel code
Could not mount ubifs filesystem: Invalid argument
opendir: No such file or directory
opendir: No such file or directory
ERROR: no system package found!
Kernel panic - not syncing: Attempted to kill init!

Starting stack dump of tid 1, pid 1 (init) on cpu 8 at cycle 11907065189
frame 0: 0xfffffff70051fc00 dump_stack+0x0/0x20 (sp 0xfffffe007eedfc08)
frame 1: 0xfffffff700518b98 panic+0x168/0x398 (sp 0xfffffe007eedfc08)
frame 2: 0xfffffff700053a78 do_exit+0x1c8/0xd48 (sp 0xfffffe007eedfcb0)
frame 3: 0xfffffff700054740 do_group_exit+0xf0/0x1e8 (sp 0xfffffe007eedfd78)
frame 4: 0xfffffff700054858 __wake_up_parent+0x0/0x18 (sp 0xfffffe007eedfdb0)
frame 5: 0xfffffff700520958 handle_syscall+0x210/0x2d0 (sp 0xfffffe007eedfdc0)

frame 6: 0x8e648 0x8e648 (sp 0x7fdbf980)
Stack dump complete
Rebooting in 1 seconds..Resetting chip and restarting.

2

I think you should press CTRL + E to enter setup…
And yes i do remember correctly…
https://wiki.mikrotik.com/wiki/Manual:Etherboot

So, maybe you missed that step ?

3

I have same problem with ccr 1009
Can you help me?
ccr.png

4

I have the same issue, same error message on the serial console.

This started after I tried to upgrade the firmware from within winbox.

Did you ever solve it?

5

Try running backup routerboot (there usually is extra button or pad on PCB to force loading of backup routerboot).
It’s possible this is bug in current version of routerboot.

6

If you press the reset button before applying power to the device then the backup bootloader will load…