Router started crashing this past week. Tried to update firmware to 6.38.7 and 6.40.3. During download, router crashed. Tried again, download finished, router rebooted, but would not update. Tried 3 more times, router crashed part way through download.
Replacement on the way, but will be Tuesday before it gets here. Any suggestions on upgrading and/or stabilizing this thing?
Do you monitor / graph the power levels of the device?
Sounds to me like it’s the PSU failing… Quite a few people suffer from PSU issues on the CCRs, despite MT claiming nothing wrong, problem fixed, new PSU, etc…
Eeks!
[me@myrouter] > sys health pr
fan-mode: auto
use-fan: main
active-fan: main
use-fan2: main
active-fan2: main
cpu-overtemp-check: yes
cpu-overtemp-threshold: 100C
cpu-overtemp-startup-delay: 1m
voltage: 16.2V
current: 2771mA
temperature: 36C
cpu-temperature: 56C
power-consumption: 44.9W
fan1-speed: 4474RPM
fan2-speed: 4712RPMIt went into a very rapid death spiral… rebooting every few hours to the point where it would reboot after 30-40 seconds of uptime. Tried a PSU from a 1009, but no joy. Replaced it with the 1009 for now.