CCR not respond sometimes (Solved!)

RouterOS General
1

Hi!,

We have a CCR works in a simple network with 20 AP’s (Ruckus).

The CCR function is DHCP and NAT, only one network. We configured the “best practises” on Firewall and bridge with “rstp” betwen ports 2 to 10.

Sometimes, from device connect to router (cable), the router not respond, ping is out!!! I check the CPU, we don’t have any repeat IP and i disable rstp bridge mode.

All is ok and configuration is very, very simple.
RouterOS v.6.13.


Any idea? possible hardware or firmware problem?



Thank you!!!

2

Hi,

Finally, the problem is solved with upgrading to 6.15 and exclude the last ethernet port to the bridge.




Thank you!!