CCR1009-8G-1S kernel failure

RouterOS General
1

Hello, I have a problem with CCR1009-8G-1S, RouterOS 6.36 (stable).
I have a first connection to ISP over PPPoE (port1), and when I make a second connection to another ISP over PPPoE (port6) and enable this connection - router reboots immediately with kernel failure. Separately, each connection is working well, but if enable 2 connection both, CCR reboots. What’s the problem? Please help.

/interface pppoe-client
add disabled=no interface=ether1-RT name=pppoe-out1 password=password1 use-peer-dns=yes user=user1
add disabled=no interface=ether6-DOMRU name=pppoe-out2 password=password2 user=user2

2

It seems problems doesn’t end with this product version , i guess i have to think twice before buying one tonight !

3

Try downgrading


Have a good day!

4

I use a CCR1009-8G-1S-1S+ and I don’t have a single problem with this device. Never had such a nice router.
Probably you read only messages about problems and no messages about successes?

5

I solved the problem. On one of PPPoE connection was enable option Dial on Demand. When I turned off this option, CCR is no longer kernal failure.
But this is a bug, I hope this bug will be fixed in future versions ROS.

6

Hm.. Write to support@ I’am can test also this two-pppoe-conn-trable


Have a good day!