CCR1036-12G-4S Using 100% of one of its CPU's

RouterOS General
1

Good afternoon,

I have been checking over my ccr1036 and i can see that there is one of the CPU’s running at 100%. It will run at 100% and then drop to nothing for about 3 seconds and then up to 100% again.

Also i have seen that it changes from one CPU to another.

Could this be the BGP doing this?

Is Mikrotik going to change this in future firmwares?

Thanks all

2

check routerboard cpu - what use your cpu to 100%-

3

i think do you mean tools profile

4

This is what i see:

I have BGP and OSPF running on the router.
Captura.PNG

5

When you run internet BGP on it, this is normal.
“It will be solved in RouterOS v7”

The important question of course is: does it cause any problems, e.g. forwarding delays or packet loss.

6

Great,

Do we have a releace date for OS7?

We havent seen any delays as of yet but are only just starting to load the router, in he next month we will have a better idea if it causes probelms.

7

Mikrotik have same talk about bgp and ros7 since 2014 so no, no date for it..