We have x86 CPU Count 40 2394 MHz, and our network performs very well on them. However, after 10 to 12 days, it stops functioning on its own, but it improves after rebooting. We recently purchased a CCR1072, but it is not functioning properly, not even for 10 minutes. Additionally we are experiencing frequent disconnect and reconnect from users, with around 1200 to 1300 instances of this occurring repeatedly.
this is x86
You are @6.48 … check 6.49.x version … there were some ppp related changes: https://mikrotik.com/download/changelogs#show-tab-tree_1-id-cd69931fddab9433ba54f62f797bdede
Already did but no improvement !!
hello @abn,
i am wondering about your pppoe and overall network design. did you put one centralized server for all these connections? 
if you run a high count of PPPoE active users on a single machine you must use a really simple configuration, fast-path mode is the optimal scenario
forget about running a heavy or complex configuration on a router running such ammount of PPPoE Active connections
any other config required you must deploy it on another separate machine or machines
about topic of separation
IP-ArchiTechs-2022-Separation-Of-Network-Functions-Webinar
this is our network
hello @abn,
ok. are those olt’s linked directly back to the core (your pppoe server)?
or do you have any pop nearest to the olt’s?
are those 1200, 1300, 3000 users differentiated by profiles? do you have any mac filters for the wires?
No differentiated by profiles, and nods
any one
we update V7 and works well for 10/12 Hr but same issue all users logout automatically Connect, disconnect