Below is a photo and the terminal command “interface Ethernet print detail”
Winbox says 1gig - Airfiber says 1000M moving 120Megs of traffic. We are noticing a lot of RX overflow packets. I think this is a result of the mikrotik thinking the link is 100M
Any Advice?
0 R name=“ether 1 - Air Fiber” default-name=“ether1” mtu=1500 l2mtu=1600 mac-address=4C:5E:0C:15:46:9F orig-mac-address=4C:5E:0C:15:46:9F arp=enabled arp-timeout=auto loop-protect=default loop-protect-status=off loop-protect-send-interval=5s
loop-protect-disable-time=5m auto-negotiation=yes advertise=10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full full-duplex=yes speed=100Mbps master-port=none bandwidth=unlimited/unlimited
