Any guidance would be great 
I was seeing if I could get some help here. I am trying to create a network from scratch that will work with my Century Link connection using Transient Bridge on the modem they give you.
I followed this guide: https://mlboyd.xyz/2018/07/06/mikrotik-hex-router-centurylink-pppoe/
Results:
- I was able to ping outbound from the router to 8.8.8.8 etc.
- No device was able to receive an IP address. Unless I set it static.
- PPPoE continued to disconnect/connect.
Attached is a screenshot of what I am seeing:
As well as I exported the redacted configuration
1.txt (4.07 KB)
I have started from scratch a few times and I am fine with starting from scratch again I just want it to work.