Chain 0 and 1 with CPE's SISO

RouterOS Wireless Networking
1

Bear with me guys, im working with RB912UAG-5HPnD and in this example im using in a small pop clients with OLD CPE’s SISO. ok, can i enable in RB912UAG-5HPnD chain 0 and chain 1 and use in some clients CPE’s the horizontal polarization and in other clients CPE’s use vertical polarization in the same POP RB912UAG-5HPnD at the same time ? im asking this because i noticed in RB912UAG-5HPnD that using the SCAN tool i found less Stations working at chain 1 and could be better work with less interference with ?

Thank you.

2

You can use stations with different pol. with no problem. You see more APs in Vpol because most of them are in Vpol. Stations can’t be found in scan mode.

3

Hello Inox, thanks you for reply, i dont know if im right and i would like to ask if

CHAIN 0 = horizontal and CHAIN 1 = vertical ?

thx

4

I found this using Scan tools, this isnot station ?

5

Those are AP’s as you can see on some of them at the radio name. In station mode the radio dont emit ssid so you can’t see them at scan.

6

You can see clients with snooper.