sogware
December 22, 2022, 10:03pm
1
Hello all,
I’ve done some simple RouterOS configurations until now, but the following is a little above my head.
I need to provide internet access to a third person who has his own hardware (Generic AP in the picture). I have an hAP AC2 connected to the internet via a bridged modem.
My (limited) knowledge tells me this should be possible, but VLANs always makes me confused.
Thanks in advance!
Paul
anav
December 23, 2022, 2:41pm
2
post your hapac and wapac settings.
sogware
December 27, 2022, 9:39am
3
Hi Anav,
Sorry for the late reply (something to do with Christmas and stuff).
This is my config for the hAP AC2:
# dec/27/2022 10:16:33 by RouterOS 7.6
# software id = CZPL-D6U6
#
# model = RBD52G-5HacD2HnD
# serial number = BEEB0B3D88E9
/interface bridge
add admin-mac=C4:AD:34:20:DF:9B auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
disabled=no distance=indoors frequency=auto installation=indoor mode=\
ap-bridge ssid=SSID-10 wireless-protocol=802.11
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
20/40/80mhz-XXXX disabled=no distance=indoors frequency=auto \
installation=indoor mode=ap-bridge ssid=SSID-10 wireless-protocol=802.11
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=default-dhcp ranges=192.168.88.100-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp interface=bridge name=defconf
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wlan1
add bridge=bridge comment=defconf interface=wlan2
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.3 gateway=\
192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment=HTTPS dst-address=204.168.X.X \
dst-port=443 protocol=tcp to-addresses=192.168.88.2
add action=dst-nat chain=dstnat comment=SSH dst-address=204.168.X.X \
dst-port=22 protocol=tcp to-addresses=192.168.88.2 to-ports=22
add action=masquerade chain=srcnat comment=Hairpin dst-address=192.168.88.2 \
out-interface=bridge protocol=tcp src-address=192.168.88.0/24
/ip route
add disabled=yes distance=1 dst-address=0.0.0.0/0 gateway=*9 pref-src="" \
routing-table="VPN Indica" scope=30 suppress-hw-offload=no target-scope=\
10
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
/system clock
set time-zone-name=Europe/Amsterdam
It is pretty default stuff with some port forwarding.
I think I need to create VLAN 10 & 20, make port 5 on hapac and port 1 on wapac a trunk for [10,20], make port 2 on wapac an access port for VLAN 20. Then add a DHCP server and pool on VLAN 20… Please guide me in the right direction!
Thanks in advance!
anav
December 27, 2022, 6:54pm
4
/interface bridge/interface vlan /interface bridge vlan add action=accept chain=input comment="accept all LAN traffic" in-interface-list=LAN add action=accept chain=forward in-interface-list=LAN out-interface-list=WAN comment="internet traffic"
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
WAPAC2
/interface bridge/interface vlan /interface bridge vlan XX /24 comment=defconf interface=HOME network=192.168.88.0 { "IP of WAPAC on home subnet }
After each config is entered go back to bridge entry and set vlan-filtering=yes
sogware
December 28, 2022, 10:29am
5
Thank you so much!
